Operating Instructions
Tip the mattress on its side. Have one person support the mattress whilst the second person attaches the clamp to the handle at approx. knee height.
To Attach –
Press the arms together at point 1
To Release –
Press the arms together at point 2
https://youtu.be/6eXf554Y4tw?si=8bGchon7NQKsQPMmhttps://youtu.be/fy_JAJVeM3k
Assembly Instructions
Using the allen key provided assemble the first of two clamps from out of the box.
Tips & Tricks
- Always wear gloves when handling mattreses
- Keep handle tight against the mattress when attaching
- Ensure clamps remain at right angles to the mattress when attaching and removing
- Make sure you have good communications with colleagues
- Remove and reverse the clamps if restricted for space when maneuvering
- When putting the clamps down always hold the handle so that the paddle’s leading edge is on the floor
(The gap shown in the diagram illustrates how the paddle is elevated above the floor keeping it away from contamination) - Keep your paddles clean
- When handling mattresses over King Size, use two sets of clamps and four people